SHX 400kw Perkins Diesel Generator Set 500kva Big Power Industrial Diesel Generator
Description:
1. Power Range: 20-2250kva
2. Engine: Perkins engine
3. Alternator: Genuine Stamford, Leroy Somer, Marathon, Meccalte, etc
4. Controller: Deepsea or Smartgen with or without AMF. Options: remote controller, synchronizing, etc.
5. ATS is optional
6. Type: Open type, Soundproof type, Trailer type, Container type, etc
7. Color: Can be customized
Specifications of 400kw Perkins diesel generator set
| Engine | Perkins 2506C-E15TAG2 | Alternator | Farrand FLD544D |
| Prime Power | 400KW / 500KVA | Standby Power | 440KW / 550KVA |
| Output Type | AC Three Phase | Frequency | 50Hz / 1500RPM |
| Cooling System | Closed Cycle Water Cooled | Control System | Deep Sea 6020 |
| Voltage | 230/400V | Circuit Breaker | 3 Pole MCCB |
| Voltage Regulation | AVR | Starting Method | By batteries |
| Color | White, Yellow, Green Etc. | Speed Governing | Electric |
Prime Power (PRP): Prime power is available for an unlimited number of annual hours in variable load application, in accordance with GB/T2820-97(EQV ISO8528); a 10% overload capability is available for a period of 1 hour within a 12-hour period of operation.
Standby Power Rating (ESP): The standby power rating is applicable for supplying emergency power for the duration of a utility power interruption. No overload, utility parallel or negotiated outage operation capability is available at this rating.
INSPECTION AND TEST
1 GENERAL
1.1 Each engine shall be tested at manufacturer’s workshop to certify the engine output and fuel consumption in accordance with the site operating condition specified by purchaser on the specification datasheet.
1.2 All relevant information drawings pertinent to the testing and test procedure shall be transmitted to the purchaser in advance of the test date notification.
1.3 The purchaser shall call for additional testing if test results are unsatisfactory or marginal. Any equipment rejected shall be repaired or replaced to the purchaser’s satisfaction and tests shall be repeated.
1.4 Any unsatisfactory material, equipment, installation, or workmanship shall be replaced or repaired to the purchasers satisfaction at the manufacturer’s cost.
1.5 The engine and generator shall be tested individually in accordance with relevant standards specified above.
1.6 The completed and individually tested engine and generator shall be assembled onto the base plate with all auxiliaries, instruments and controls for a complete test of the generator set.
Product Tags:
|
|
OEM ATS 400kw Perkins Generator Big Power Industrial 500kva Diesel Generator Images
|
